On October 23, ARKEN introduces the TARGETLOCK TL3000, a weapon-mounted ballistic laser rangefinder that combines ranging out to 3,000 yards, the DNT Ballistic Engine, and Kestrel® compatibility in a compact, rail-mounted design.
Built for competitive shooters, long-range hunters, and precision shooting enthusiasts, the TL3000 brings ranging and ballistic calculations together in one weapon-mounted system. At $599.99 with code ARKEN, it makes weapon-mounted laser rangefinder (WMLRF) technology more accessible.
A close-up of the ARKEN TARGETLOCK TL3000 rangefinder mounted on a rifle scope.
Compact Weapon-Mounted Rangefinder, Built for Fast Operation
Measuring 3.6×2.3×1.4 in (92×59×35 mm) and weighing 7.5 oz (213 g), the TL3000 packs ranging and ballistic capabilities into a compact, CNC-machined aluminum housing. Its Picatinny mounting interface integrates the unit into compatible rifle setups while keeping its footprint small.
Side-by-side size comparison of the ARKEN TL3000 rangefinder next to a credit card and a coin
ARKEN TL3000 compact rangefinder demonstrating its 7.5 oz lightweight build.
The included wired pressure switch allows users to activate the rangefinder without changing their grip or shooting position. A co-aligned 515 nm green visible laser helps indicate the point of aim during setup and zeroing.
The TL3000 rangefinder with its 515 nm green laser activated.
An onboard gyroscope automatically adjusts the display orientation and measures incline angle for ballistic calculations. Tactile controls support operation in demanding conditions, while the OLED display with an anti-reflection coating helps keep readings visible in bright light.
With an IP67 protection rating and an operating temperature range of −4°F to 122°F (−20°C to +50°C), the TL3000 is designed for use across a range of outdoor environments.
One Press, One Firing Solution: Ballistic Ranging to 3,000 Yards
The TL3000 combines laser ranging with the DNT Ballistic Engine to streamline the process of obtaining a firing solution. Single-pulse and continuous ranging modes accommodate different ranging needs, while Line of Sight (LOS) and Horizontal Component Distance (HCD) provide two options for distance input.
The unit displays ballistic corrections in MRAD, MOA, clicks, centimeters, or inches, allowing users to work with their preferred adjustment units.
Maximum ranging distance varies by target type:
-
Reflective targets: Up to 3,000 yards
-
Tree trunks: Up to 2,000 yards
-
Deer: Up to 1,100 yards
Ranging accuracy is specified at ±1 yard within 2,000 yards, with a resolution of 0.1 yard.
The LOS mode uses line-of-sight distance and incline information in the ballistic calculation. HCD provides the horizontal component of the measured distance to account for the effect of angle on distance. The appropriate mode depends on the shooter's setup and intended application.
Testing showed a high level of consistency between DNT and Applied Ballistics (AB) ballistic calculations across 100–1,000 yards. The comparison used the DNT and AB Quantum (Elite) apps with a 5.56 rifle and AAC 77gr OTM ammunition. Results are specific to the rifle, ammunition, distances, and test conditions used.
10 Onboard Ballistic Profiles + 6,000+ Profiles via DNT App: Switch Setups in Seconds
Different rifles and ammunition combinations require different ballistic inputs. The TL3000 stores up to 10 independent ballistic profiles, designated Slots A–J, allowing users to maintain separate configurations for multiple setups.
The DNT App for iOS and Android lets users build custom ballistic profiles using its library of 6,000+ Ammo Profiles. With one tap, users can sync a selected profile to the TL3000. The device stores up to 10 onboard ballistic profiles in Slots A–J, making it easy to switch between rifle and ammunition setups. Users can configure inputs such as zero distance, muzzle velocity, bullet weight, and ballistic coefficient.
DNT App ballistic table interface for syncing profiles to the TL3000.
Over-the-air (OTA) updates allow the device software to be updated as supported updates become available. Using accurate rifle, ammunition, and muzzle-velocity data is important for obtaining useful ballistic solutions.
Wind and Weather Integration for Ballistic Calculations
The TL3000’s MET module supports wind speed, wind direction, temperature, humidity, and barometric pressure inputs for ballistic calculations.
Connect a compatible Bluetooth-enabled Kestrel® weather or ballistic meter to send real-time environmental data directly to the TL3000 and its onboard DNT Ballistic Engine. Users can also enter wind and atmospheric data manually when a compatible sensor is not available.
With ranging, environmental inputs, and ballistic calculations handled through the weapon-mounted unit, shooters can get a firing solution without moving between a handheld rangefinder, a weather meter, a ballistic app, and the scope to dial. Key information and controls stay on the TL3000, helping users maintain their cheek weld while operating the system.
When compatible environmental data is available, the ballistic calculation can account for those inputs alongside range and the selected ballistic profile. This brings key ranging and environmental information into one system without requiring a separate handheld rangefinder for distance measurement.
Kestrel meter connected to the TL3000 for real-time environmental data input.
Who Is the TARGETLOCK TL3000 Built For?
The TL3000 mounted on rifles for PRS Competition, Long Range Hunting, and Precision Shooting.
PRS Competitors: Faster Solutions Under Time Pressure
In timed PRS stages, quick decisions matter. The TL3000 combines ranging and ballistic calculations in one weapon-mounted unit, helping competitors get firing solutions with fewer steps.
Mountain and Open-Country Hunters: Data for Changing Conditions
Changing terrain and wind conditions can complicate long-range shots. The TL3000 combines ranging and ballistic calculations with support for external environmental data. Its maximum stated ranging distances are up to 2,000 yards on tree trunks and 1,100 yards on deer.
Precision Shooting Enthusiasts: Simplified Ballistic Calculations
For shooters practicing at 500 to 1,000 yards, the TL3000 streamlines the process of obtaining a firing solution. Its 10 independent ballistic profiles support different rifle-and-ammunition setups, while the built-in gyroscope measures incline angle and automatically adjusts display orientation to help shooters focus on the shot.
TARGETLOCK TL3000 at a Glance
For complete specifications, battery information, and compatibility details, visit the TARGETLOCK TL3000 product page.
The TARGETLOCK TL3000 Is Here: Long-Range Ballistics for $599.99
The ARKEN TARGETLOCK TL3000 brings long-range laser ranging, onboard ballistic calculations, multiple ballistic profiles, and environmental data integration into one compact, weapon-mounted system.
For shooters looking to integrate ranging and ballistic calculations into a precision-rifle setup, the TL3000 offers these capabilities for $599.99 with code ARKEN.
Build Your Complete PRS Setup
Pair the TL3000 with a compatible EP-5 PRS series riflescope, the RPP34-15020 Rigid Precision PRS Mount, and the RP-DB34 Rigid Precision Diving Board to build a coordinated precision-shooting setup.
ARKEN's complete PRS setup, featuring the TL3000 rangefinder, EP-5 scope, RP34 mount, and RP-DB34 diving board.
→ Shop the PRS Competition Setup
